Features
- Fits most
26", 32", 37", 40" LCD & LED flat panel HDTV screens
- 1.65" depth from wall
- On touch tilt +0/-12 degrees
- 23" wide wall plate
- Mounts to double studs on 16" centers
- Supports 100 lbs
- Solid
heavy-gauge steel construction
- Open back plate for in-wall cable routing to the back of you TV
- Supports
VESA: 100x100, 200x100, 200x200,300x200, 300x300,400x300, 400x200, 500x200, 500x300 hole patterns
- Hole patterns and dimensions
Plate size H : 23" (585
mm)
Arms size V : 15" (380 mm)
Compatibility:
This universal wall-mount bracket is designed to fit flat-panel LCD and
LED screens from 26" to 40". The TV can have a maximum weight of 100 pounds.
Construction:
The bracket is constructed of heavy-gauge steel.
Mounting:
The wall plate must be anchored directly to wall studs using the
supplied lag bolts. The slots in the wall plate can accommodate a variety of
stud spacing, allowing you to easily mount the TV to wall studs that are 16" on
center. Once the wall plate is anchored to the wall studs and the TV rails (with
the TV attached) are hooked onto the wall plate, the TV can slide left to right,
allowing you to center the TV on the wall. After the TV is secured, it will be
held approximately 1.65" from the wall.
TV
Hole patterns Supported:
Horizontal 4" to 20.5" 100---530 mm
Vertical 4" to 13.5" 100---345 mm
WHAT’S
IN THE PRODUCT’S BOX?
- 23"
wide Back Wall plate
- 2
Tilt TV rails, 15" long each
- All
necessary Screws for Wood Stud installation
- Screws
for back of the TV
- Manual
|
Wall mount was installed within 30 min. 
