Features
KEY
FEATURES:
- Your
screen will be only .98" from the wall
- Vesa 1150x725 Support for most new Plasma, LCD
Specification (supports 65" Panasonic or Sharp)
- J-bar
with 2" Adjustable Height after
installation (Patent Pending)
- Solid
heavy-gauge steel construction
- Durable
powder-coated finish (black or silver)
- Fits most 55",
60", 61", 63", 65" and 71" PLASMA & LCD screens.
- Supports
up to 220 lbs.
- Easy
to install with 49" back
plate to support up to 4 studs (most mounts are only
28")
- TV
can slide left to right on the 49" back plate, allowing you to center the TV on
the wall 5" to 24"
- Theft-resistant
security lock bars included
- Stand and Arm compatible back plate
- Horizontal Level marker for easy installation
- Made In U.S.A.
Compatibility:
This universal wall-mount bracket is designed to fit flat-panel plasma
and LCD screens from 50" to 65". The TV can have a maximum weight of 220 pounds.
Construction:
The bracket is constructed of heavy-gauge steel.
Mounting:
The wall plate must be anchored directly to wall studs using the
supplied lag bolts. The slots in the wall plate can accommodate a variety of
stud spacing, allowing you to easily mount the TV to wall studs that are 16" or
24" on center. Once the wall plate is anchored to the wall studs and the TV
rails (with the TV attached) are hooked onto the wall plate, the TV can slide
left to right, allowing you to center the TV on the wall. After the TV is
secured, it will be held approximately 1.0" from the wall.
Note:
Each TV rail has a top and bottom vertical slot. Each rail can accommodate vertical hole spacing (on the back of
the TV) from 6-3/4" to 29".
Since
the TV rails can slide on the wall plate, the horizontal hole spacing on the back of
the TV can be up to 46".
WHAT’S
IN THE PRODUCT’S BOX?
- 49"
wide Back Wall plate
- 2
TV rails, 30" long each
- All
necessary Screws for Wood Stud installation
- 2 Lock bars
- Manual
|
