-
This universal wall-mount bracket is designed to fit flat-panel plasma and LCD screens from 27" to 45".
-
VESA 200x200, 400x200 and the max 550x310
-
The TV can have a maximum weight of 125 pounds.
-
Your screen will be only 1.6" from the wall (most other Tilt Mounts are 2.5" to 3" from the wall)
-
Adjustable Easy Tilt provides 0° to +15° angle of viewing
-
Easy to install with 25" back plate to support up to 2 studs
-
TV can slide left to right on the 25" back plate, allowing you to center the TV on the wall 5" to 8"
-
Introducing Dura-Lock™ Theft-Resistant Security Locking Bar System
-
Stand and Arm compatible back plate
-
Horizontal Level marker for easy installation
-
Solid heavy-gauge steel construction
-
Vertical hole spacing: min 6 3/4" to 12 1/2" (310mm)
-
Horizontal hole spacing up to 22" (550mm)
-
Durable powder-coated silver or black finish
-
Comes with all the necessary Screws for Wood Stud installation
-
2 Lock bars
-
Manual
The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.6" from the wall. Note: Each TV rail has a top and bottom vertical slot. Each rail can accommodate vertical hole spacing (on the back of the TV) from 6-3/4" to 14".
