Search
Categories
TV make and Models
Accessories
Information
Mount Types
Government

  Home > Samsung TV Wall Mounts > Samsung 55" >

Samsung UN55HU6950F 55" Ultra High Definition TV Fireplace Wall Mounting Bracket lowers 30"
Samsung UN55HU6950F Fireplace TV Mount that lower 30"


 
Alternative Views:



List Price: $599.99
Our Price: $559.99


Availability:: Discontinued
Product Code: WMW-PULL-SAM-UN55HU6950F

Description
 
Finally the worlds only Samsung UN55HU6950F Smart HU6950 Ultra High Definition TV fireplace TV wall mount designed to pull out and then to swing downward 30". This incredible bracket is fully compatible with the Samsung UN55HU6950F 55” Class LED TV. In most homes today the fireplace is the natural focal point, which makes mounting a Samsung UN55HU6950F flat panel above the fireplace an ideal location. Unfortunately, above the fireplace isn't the most ergonomic position for Television viewing. With our new fireplace Mount your Samsung UN55HU6950F flat panel can be stored above the fireplace and when needed it can be pulled down easily for a more comfortable viewing experience.

Another common feature of fireplaces is the mantel, for any other mount that goes directly up and down, the Television can not get past the mantel. The engineer of this fireplace TV mount solved this issue by having a circular motion instead of a linear motion. The circular motion allows the flat panel to move around the mantel so that a comfortable viewing position can be reached.


Special Notice: Wall Mount World nor the manufacturer takes no responsibility for damage caused from the fireplace or other heating sources to the television, mount, or other accessories. Damage could be done when the mount is down, out, or even up. It is up to the consumer to take the proper precautions to avoid damage. Electrical equipment can be overheated easier than expected. Wall Mount World and the manufacturer recommends against having fires in the fireplace whenever there is electrical equipment around.
Features
  • Fully compatible with Samsung UN55HU6950F 55" flat screens
  • 30" travel with 4" mantel depth
  • 24" travel with 12" mantel depth
  • Built in tension system
  • Swings out and around obstacles such as fireplace mantels that are 14.5" and less
  • Automatically locks when in the up position
  • Profile from wall fully collapsed: 4.4"
  • Extension from wall: 15"
  • Fully lowered depth from wall: 10"
  • Weight capacity 110 lbs.
  • Tilt range -4/6 degrees in the down position
  • Tilt range in the up position 0/15 degrees
  • Fits VESA sizes: 200x200 up to the maximum 691x502mm
  • Wall Plate dimensions: 22" w x 10.75" H
  • Mount assembly total height 23.6"
  • Integrated cable management system built in






































































Above Mantel Mounting

To get as much downward travel as possible when mounting above a mantel it is very important that you put extra thought into the mounting process. In general, the higher the Down and Out Mount is above the mantel the more downward travel you will get. Also, the lower the television is attached on the mount, the higher the Down and Out Mount can be mounted to the wall.

The table and drawing below can be used together to figure out how much downward travel you will get with different mantel depths and heights above the mantel. The smaller table tells you the minimum height the television needs to be mounted above the mantel.

For example, you want to find the downward travel [T] when you have a 9 inch mantel depth [D] and you mount the bottom of the mount 5 inches above the mantel [H]. First find the corresponding [D] and look down the column and find the closest [H], which in this case is 5.75 and 4.75. Round up to be on the safe side to the 5.75 inches [H]. Now go left along the row and find the corresponding Travel [T]. In this case you will get a downward travel of at least 25.5 inches.

Figuring out the clearance needed between the bottom of the television and the mantel in the up position to ensure the television will not hit the mantel is much easier. Simply find the mantel depth [D], in this example 9 inches, and go down the column and find the corresponding height, which is 2.75 inches.

Share your knowledge of this product with other customers... Be the first to write a review