Home > Hospital / Medical Office Mounts >

63" extensions Adjustable Height Swingout Mount for Small Flat-Panels

Monitor Wall bracket with 63in extension for hospitals, dental office are any where long extension is needed

Alternative Views:

Our Price: $899.99

Availability:: Usually Ships in 24 to 48 Hours
Product Code: CU-MEDICAL-63




Wall Mount Overview

This 63" extension adjustable height swingout mount for small flat-panels was designed for the healthcare industry. The incredible long arm of this bracket supports displays that weigh between 12 lbs up to 18 lbs and they have VESA mounting pattern of 75x75mm, 100x100mm to max of 200x100mm. The flexible mounting arm extends up to 63in and includes a built-in double gas spring system that aids in height and length adjustment. The mounting head offers tilt +90.00/ -90.00 degree, swivel +90.00/-90.00 degrees and 360 degree rotation. Great for use in dental offices, surgical centers, operating rooms, hospital patient rooms, medical offices and for bed ridden patients in the home.

Cable management to keep power and signal protected and organized.
Designed for the healthcare industry (i.e. hospitals, dentist office)
Smoothly extends up to 63 in. for comfortable viewing
Arm assembly is 44.5 inches tall when collapsed back to wall
Key hole mounting slots for faster installations
90 of omni directional movement

Compatibility Note: The bracket can accommodate flat panel displays that do not exceed the weight limit of 18 lbs or exceed the maximum VESA mounting hole pattern of 200x100mm. Contact us for compatibility with your make and model number before purchase if unsure.

FYI: The bracket has to be mounted to the wall to operate as deigned. The spring loaded system will not operate without being attached. By hand alone and not mounted you will not be able to pull it down. We have had questions about it not being able to move while taking it out of the box. That is why we are letting you know that it must be mounted to the wall first then you will see the functionality of the mount.

General Notes:
1. The wall must have enough built in support to attach the wall plate and to support the load of the monitor attached when the arm is fully extended from the wall.
2. The arm when stored back against the wall is 44.5 inches high so make sure you have overhead clearance on the wall it is attaching to when mounted.
3. Includes reinforced wall plate for greater stability.
4. Survey the area which the bracket will be mounted to ensure that no obstructions will exist in its path of extendable arms movement and positioning for viewing of monitor. Examples would be cabinets to the side of it, overhead lighting, walkways, columns, etc.


Technical Description

  • TV 10 - 20 displays (some 27" TVs will fit, check VESA/Weight)
  • Fits most OLED, QLED, LED, LCD Monitors
  • Minimum Weight capacity 12 lbs (5.44kg)
  • Maximum Weight capacity 18 lbs (8.2kg)
  • Weight Ranges 12 lbs - 18 lbs ( Must fall within these weight ranges or will not work)
  • Max mounting pattern200x100mm
  • VESA mounting patterns 75x75mm, 100x100mm, 200x100mm
  • 10.63" (139.7mm) Minimum Extension
  • 63" (1600mm) Maximum extension
  • 44.5"Arm height upright when collapsed back to wall
  • +90/90 degrees (up or down) adjustable tilt
  • 180 (side to side) Swivel
  • 360 (Portrait/Landscape) Rotation (yaw)
  • Single stud mounting
  • Wall Plate dimensions 15" h x 5-1/8" w
  • Product finish scratch resistant epoxy powder coat
  • Color White
  • Mounting Hardware Included

Share your knowledge of this product with other customers... Be the first to write a review